CA Series
HTC CA series double segment diamond tooling is used for soft to medium concrete, while the single segment diamond tooling is used for smaller machines due to their lack of weight (down pressure), but can be used with larger machine for very hard concrete or coatings removal.
NEW EZstart - Only from HTC!
The gooved surface makes it easier for the tool to open and achieve maximum cutting capacity from the start. The grinding operation becomes more effective and delivers better results in less time.
CA 0 Purple
Hard bond diamond segment for effective coarse grinding of soft to medium concrete. Leaves a very coarse profile for coatings. Available in single or double segment wings.
CA 1 Silver
Hard bond segment for stock removal and concrete leveling. Ideal for prepping and leveling concrete. Also good for removal of coatings with non-skid silica sands. Available in single or double segment wings.
CA 2 Gold
Hard bond segment ideal for concrete grinding, removing light coatings, dry glues, and mastics. Not too aggressive on the concrete below the coatings. Available in single or double segment wings.
CA 3 Grey
An all-around segment for concrete, marble, and terrazzo. The tool has a high rate of removal without spalling or breaking out lippage or curled joints. Available in single or double segment wings.
CA 4 Brown
Leaves the ideal smooth profile. For prepping concrete for acid staining. Available in single or double segment wings.
CA 5 Black
Used mainly in concrete and terrazzo. For fine grinding of exposed concrete. Gives nice smooth low maintenance floor with a flat look. Available in single or double segment wings.
CA 6 Blue
Can be used on terrazzo and concrete. For fine grinding of exposed concrete. Gives a nice smooth, low maintenance floor with a flat look. Use dry on soft concrete, and wet on medium or hard concrete. Available in single or double segment wings.